Learn networking
Subnetting Explained: CIDR, Masks and Host Counts
Subnetting is the single most-tested skill in the CCNA, and it is also one of the most useful things a working network engineer does.
5 min readVLSM Step by Step: Planning Subnets Without Wasting Addresses
Fixed-length subnetting gives every subnet the same size — which means the subnet sized for your biggest department wastes most of its addresses in the smallest one.
5 min readHow OSPF Chooses Paths: Cost, Areas and Route Types
OSPF is a link-state routing protocol: every router builds a complete map of its area (the link-state database) and independently computes the shortest path to each destination using Dijkstra's algorithm.
5 min readBGP Best-Path Selection, Step by Step
BGP does not use a single metric like OSPF's cost.
6 min readDHCP's DORA Process, Explained Packet by Packet
DHCP (Dynamic Host Configuration Protocol) is how devices get an IP address, subnet mask, gateway and DNS servers automatically when they join a network.
5 min readNAT and PAT Explained: How Private Networks Share One Public Address
IPv4 has about 4.3 billion addresses — nowhere near enough for every device on earth.