ARP Simulator

4 Scenarios · Request/Reply · Gratuitous ARP · Spoofing/MITM · Proxy ARP · RFC 826

A free protocol simulators tool from NetOcta that runs entirely in your browser — no sign-up or install.

About this tool

An IPv4 address tells a device where it wants to send a packet; a local Ethernet frame also needs a destination MAC address. ARP connects those two pieces. This browser simulator shows request and reply, gratuitous ARP, proxy ARP and a spoofing scenario. The cache and packet fields help beginners see why local delivery needs more than an IP address.

How it works

  1. Choose an ARP scenario and inspect its local devices.
  2. Play and watch who receives the request.
  3. Follow the reply and the resulting cache entry.
  4. Compare normal discovery with the other scenarios.

Worked example

Host 192.168.1.10/24 wants to contact 192.168.1.20. It broadcasts an ARP request to ff:ff:ff:ff:ff:ff. The target replies with its MAC, for example 02:00:00:00:00:20. For a destination outside /24, the host instead resolves its gateway's local MAC.

Common mistakes

ARP does not search the whole internet. Routers do not forward ordinary ARP broadcasts across subnets. A remote destination IP stays the destination of the IP packet even when the Ethernet frame is addressed to the gateway.

FAQ

Does IPv6 use ARP?

No. IPv6 uses Neighbor Discovery with ICMPv6. The spoofing example here is an illustration; the simulator does not send attack traffic to a real network.