ICMP / Traceroute

Watch ping and traceroute hop by hop: TTL expiry, ICMP Time Exceeded, Echo Reply and unreachable messages.

A free protocol simulators tool from NetOcta that runs entirely in your browser — no sign-up or install.

About this tool

ICMP carries useful network feedback, including replies to ping and reports that a packet's lifetime ran out. Traceroute uses controlled probe lifetimes to reveal intermediate routers. This browser simulation makes those invisible events visible one hop at a time. Start with the packet's route, then connect TTL expiry and error messages to the output a troubleshooter sees.

How it works

  1. Open the ping or traceroute scenario provided by the simulator.
  2. Follow a probe toward the next router.
  3. Watch TTL decrease and identify where it expires.
  4. Compare intermediate feedback with a destination reply.

Worked example

On a three-router path, a probe with TTL 1 expires at the first router. TTL 2 reaches the second before expiring, and TTL 3 reveals the third. Each normally sends ICMP Time Exceeded. A later probe reaching the destination produces a response appropriate to the probe method.

Common mistakes

An asterisk is not proof that a router is down: replies may be filtered or rate-limited. The return path may differ from the forward path. Do not assume every traceroute implementation sends ICMP Echo probes; some use UDP or TCP.

FAQ

What does ping measure?

A successful ping measures round-trip time for that probe and reply. It does not directly measure available bandwidth or guarantee that an application port is accessible.